|
|
October Webinar: Automated Roving Accelerometer Impact Test
|
 |
| |
Join Mark Richardson, President and CEO of Vibrant on Thursday October 27th at 10am MT for "Automated Roving Accelerometer Impact Test"
In this month’s Webinar, some of little known features of ME’scope will be used to perform a roving accelerometer impact test of the Jimbeam. This type of test will yield 3D ODS’s and mode shapes at each point where data is acquired with a tri-axial accelerometer. It can be performed on any structure (small or large) where an impact hammer will adequately excite the modes of interest. All that is required is;
-
An impact hammer instrumented with a load cell
-
A tri-axial accelerometer
-
A four-channel data acquisition front end
-
And of course ME’scope
First, point icons will be used on the Jimbeam to show how the tri-axial accelerometer should be mounted at each test point. Next, Measurement Sets will be used in the ME’scope acquisition window to define the measurement for each impact on the structure. Finally, only six points on the top plate will be tested and a set of FEA mode shapes for the Jimbeam will be used to define the EMA mode shapes for all of the unmeasured points of the structure. Scripts & Hotkeys will be used to automate the entire process; acquisition, curve fitting, and mode shape animation.
Register for Webinar
|
|
|
Join Us At The IMVAC Conference
 |
|
| |
Join Vibrant Technology at The International Machine Vibration Analysis Conference (IMVAC). This is a MUST ATTEND event October 31 – November 2, 2016 in beautiful sunny Orlando, Florida. This conference is for vibration analysts, condition monitoring technicians, and maintenance/reliability managers who want to improve their knowledge about vibration analysis and complimentary technologies. IMVAC is for learning the practical aspects of vibration analysis and condition monitoring from industry experts and the experience of others. IMVAC’s aim is to provide you actionable new skills that you can take back to the plant to help you do your job better.
What attendees get:
-
5 keynote presentations by industry leaders
-
Access to your choice of half-day workshops
-
Access to all presentations & case studies
-
Round-table sessions
-
Breakfast, lunch, and refreshments daily
-
Networking receptions
-
Exhibition hall access
-
Chance to win a Surface Pro 4 computer and more
-
Post-conference access to presentation video recordings
-
Register using this discounted Vibrant Technology registration link Vibrant Technology Registration Link and receive an additional $139.50 off the regular conference rate.
For further information about IMVAC visit www.vibrationconference.com.
Don’t forget to ask about IMVAC’s Team Special:
Buy 2 passes and get the third for free, that’s right you can save $1,395 for bringing three people.
Visit the Vibrant Technology booth and plan to attend the presentation by Mark H. Richardson, President & CEO, on November 2nd at 11:15 am titled, “Detection and Diagnosis of Three Common Rotating Machinery Faults”.
See you there!
|
|
|
Join Vibrant at the 31st International Maintenance Conference
Join Vibrant at the 31st International Maintenance Conference (IMC 2016) in Fort Meyers FL. December 12-16th. IMC-2016 is for Maintenance Reliability leaders, Asset Managers and anyone who is involved with Condition Monitoring. IMC-2016 will benefit anyone who is responsible for planning, scheduling, managing, or implementing any part of an organization’s maintenance reliability, operational excellence, or asset management function. Visit our booth and view the Vibrant Portable Monitoring system for remote machine health monitoring, structural health monitoring, and walk-around data collection and fault diagnosis.
|
|
|
Portable Health Monitoring Systems from Vibrant
|
 |
| |
Vibrant now offers 4 to 56 channel Portable Heath Monitoring Systems. A ruggedized Pelican® carrying case containing a solid state computer pre-loaded with ME’scope software for continuous acquisition and post-processing of vibration and acoustic data. Network-based software for remote machine health monitoring and structural health monitoring, or for walk-around data collection including fault diagnosis. Three positive and three negative pass/fail levels for each acquired signal. Cloud based archival storage of acquired data with four levels of FIFO control, including time waveforms, narrow & octave band frequency spectra, comparison of current & baseline data. Trend plots of acquired data, and waterfall plots of spectra. Event log documentation of warning level crossings., email & text message notification when a warning level is exceeded, and more.
Starting at $9825.
Click on the datasheet for more information
Contact sales@vibetech.com or your nearest VT reseller for more details.
|
|
|
ME'scope Ribbons, Did You Know?
Did you know that ME'scope can be configured to display all the menu items in Ribbon format? This is a much easier way to view the ME'scope commands without having to drill down into menu dropdowns. Give it a try. Go to Project | ME'scope Options | Menu Style and select Ribbon from the drop down. Restart ME'scope and voila, now all the ME'scope menu options are grouped and easily accessed with minimum mouse clicks.
|
|
|
ME'scope Help Now Online
Need help with ME'scope but aren't in front of your laptop? The entire ME'scope Help is now available online so you can access it whenever, and wherever you need it. Point your browser to http://help.vibetech.com/ to access all of the ME'scope help files, tutorials, and command definitions.
|
|
|
|
|
