New drivers

• Gamesa modbus driver: Item number 421.049 (not for WEB'log Comfort)
  The 500kW TL Plus inverter is supported.

Software modifications

• Delta SI driver: Item number 421.050
  The driver now also supports the RPI H3A, RPI H4A, RPI H5A, RPI M6A, RPI M8A, RPI M10A, RPI M30A and RPI M50A inverters.
   
• Elettronica Santerno modbus driver: Item number 421.017 (not for WEB'log Comfort)
  The driver now supports the Sunway TG 52 DUAL inverter too.
   
• Ingeteam driver: Item number 421.035
  Inverters with a number of power sections are now supported. As a result, all available measured values can be queried from the Ingcon Sun Smart 18 TL inverter.
   
• REFU / Advanced Energy driver: Item number 421.075
  The alarm texts for inverter alarms now include the manufacturer's exact error code. This can now be found in the alarm message and no longer needs to be retrieved from the inverter.
   
• Sputnik / Solarmax driver: Item number 421.080
  The driver now allows the F-AC grid frequency to be queried.
   
• Steca driver: Item number 421.098
  The driver now supports the Solar Frontier inverter range.

All drivers (not for WEB'log Comfort)

• From now on, the altitude can be recorded in Kompakt weather stations (423306_WS600_UMB and 423307_WS501_UMB) via the data logger.
   
• The Power Control alarm messages now contain the respective Power Control status. As a result, the Power Control operating mode can be ascertained from the message.
   
• The "Power Control Communication Failure" alarm message is now more specific and contains information as to which device has suffered a communication failure (WEB’log SLAVE or PCU).

The 6-port media converter 4x10/100+2x100FX-MM-SC (item number 422.413) was dropped from our range on December 1, 2014. As an alternative model we recommend:
6-port media converter EL100-4U/4TX-2FX-MM-SC (item number 422.433)

The new media converter offers the following improvements compared to the previous model at a consistent price:

• Wider input voltage range (12-70 V DC instead of 12-48 V DC).
• Optional usage of a plug-in power supply.
• Higher optical budget with Multimode: The EL-4U media converter allows a range of up to 5 km instead of 2 km.
• Variable fiber optic connections possible (ST, SC and even LC). SM and MM can also be mixed in a switch.
• Various mounting options: in a 19 inch frame or top hat rail fixing on the side.

Selecting the master data logger (WEB'log) in the portal

In the safer´Sun Professional and VCOM virtual control room, a number of data loggers can be combined to form a single system in the portal. Under "Data Loggers → Administration", you can now specify which data logger is to be used as the master. For this purpose, portal administrators are shown a corresponding message when configuring a system ("Administration → System Configuration"). This setting is necessary to display for example adjustment settings carried out by direct marketers or the utility.

New function in the VCOM virtual control room: tab management

The new tab management function makes it possible to create and manage (move, edit, delete) new folders and pages on park level. You can create new pages as separate tabs or a number of pages in one folder. As usual, the individual pages can then be customized with content (portlets) to meet your specific requirements. You will find the new function under "Options → Manage Tabs".